Varnish maintenance may not always require a lot of time and effort. All you have to do is use the polymer protection Project F - RinzME and wash a car. Which you will achieve a great hydrophobic effect with a self - cleaning ability. In this manual, we will describe the application and dilution of the product.

Wash a car

In this step, we will not deal with pre-washing the body, provided that you do not have dried insects, asphalt or a layer of wax and other protection on the vehicle. We work in the shade and the surface of the paint should be cool to the touch. We perform normal washing in simple steps. We need a bucket of water with a separator, into which we dilute a car shampoo in a ratio of 40 ml to 10 liters of water and another bucket soaked in clean water, in which we will rinse the wash mitt. Rinse the vehicle with a pressure drop from the bottom up. There is the greatest dirt in the lower part of the vehicle and the water will act on it for a longer time, soaking the dirt. Wash the surface of the vehicle safely from top to bottom with a wash mitt and car shampoo. Our Project F - WashIT car shampoo has a neutral PH and thus does not damage waxes and sealents. It is suitable for regular maintenance together with a microfiber washing glove, which safely absorbs dirt, thus preventing unwanted damage to the paint. After washing, rinse the surface with water from top to bottom.

Project F - WashIT

Wash a car with carshampoo

Project F - WashMITT

Wash a car with wash mitt

Project F - RinzME - dilution

Product dilution

Surface before application - without protection

Surface before application - without protection

Surface during application

Surface during application

Project F - RinzME Product dilution

Product dilution

Dilution and application of protection

Dilute Project F - RinzME in a ratio of 15-30 ml products per liter of water to a pressure bootle for manual application, spray or a foamer. For foamers that are used together with pressure cleaners, we recommend diluting 100ml per liter of water, as additional water is supplied during application. We apply the diluted product to the wet, already washed surface of the vehicle. We can also apply it to parts such as wheels and glass. Let it work for a short time for about 30 seconds. We rinse the vehicle from top to bottom with a strong stream of water.

Project F - RinzME - Rinse the vehicle from top to bottom

Rinse the vehicle from top to bottom

Project F - RinzME Surface after product application

Surface after product application

Project F - RinzME Surface after product application

Surface after product application

Project F - RinzME Surface after product application

Surface after product application

Body drying

For a perfect result, it is a matter of course to dry the body to prevent unwanted dots in the footsteps of water. For this step we will use the drying towel Project F - Perfect DRY. Simply apply to the surface and pull to remove residual water.

Conclusion

Thanks to a simple application that is not time-consuming and can be done by everyone, you can protect your vehicle and increase shine. The self-cleaning effect ensures a cleaner surface even in the event of rain and other weather conditions. Project F - RinzME can be ordered in 500ml and 5l packages. Thanks to the great concentration, the application is based on dilution to a few cents. (depending on packaging)

Body drying - drying towel

Body drying - drying towel

Comments (0)

Product added to wishlist
Product added to compare.

By using this website, you agree to the storage of cookies, which we use to provide services and customize ads